How To Choose A Replacement Hoverboard Charger

hoverboard charger

One of the most important Accessories of a hoverboard is its charger. The lost or broken charger will make your hoverboard unusable.

If you are looking for a replacement hoverboard charger then you are in the right place. This article will guide you to find the best suitable replacement charger for your hoverboard.

TABLE OF CONTENTS

Important specifications to consider before buying a replacement hoverboard charger

Not every hoverboard charger will fit your hoverboard there are certain specifications that determine whether the charger is compatible.

Following are the most important specifications of a hoverboard charger to be considered before buying it.

Number of Connector Prong

When it comes to hoverboard chargers there are two types of connectors that are mostly preferred by hoverboard manufactures, one is 3 prong connectors and another is one prong connector. If the number of connector prong mismatches then it won’t fit your hoverboard which makes it impossible to charge.

NOTE: The Prongs are nothing but the number of connector pins in the charger.

The Connector Diameter Measurements

The most common mistake in buying the hoverboard charger is not looking for the diameter measurements of the connector. If the connector diameter doesn’t match with the hoverboard requirement then you won’t able to use your hoverboard charger. There are two types of diameter measurements in hoverboard charger – 32.1 and 33.2 inches.

Volt

Always check the replacement charger’s volt because it must match with the battery’s voltage. If you buy a charger that mismatches with your hoverboard volt it doesn’t mean it won’t work but in a long run, it might cause damage to your hoverboard as well as to your charger.

UL Certificate

When the hoverboard was introduced everyone was crazy about it and the manufacturers of hoverboards were producing them in mass volume to meet the demand but there was no standard measure to check the quality and that led low-quality hoverboards into the market.

Due to the low-quality hoverboards many hoverboard fire incidents were reported, taking these incidents into account UL Certification was introduced as a standard for hoverboards as well as for its charger, this certification ensures the safety of the hoverboard and its charger. So if you want to buy a hoverboard or a charger for your hoverboard make sure it has UL Certification.

Top Universal Hoverboard Chargers

Every electronic device has universal replacement chargers similarly hoverboards too have chargers that support most of the hoverboard model.

Below mentioned are the Top universal hoverboard chargers, along with the charger the specifications are also mentioned so that you can choose the exact hoverboard charger that matches your hoverboard.

The Universal Hoverboard Chargers falls into two categories 

  1. Three Prong Hoverboard Chargers 
  2. One Prong Hoverboard Chargers
 

Three Prong Replacement Hoverboard Chargers

The Hoverboard Chargers with Three Prong are the most common charger of the hoverboard. Followings are the top most three-prong hoverboard chargers.

1. LotFancy 36V 42V 1A Battery Charger

Important Specifications

  • Three Prong Connector
  • Suitable For 36V To 42V Hoverboard Batteries.
  • 8mm Connector Diameter

LotFancy charger works for 36 V to 42 Volt hoverboard battery. This charger is designed to charge only the Lithium-ion Hoverboard Battery, so if it is used with another type of battery then it will lead to battery damage. This Hoverboard charger comes with UL certification that assures the quality of the charger.

The Light indicators are provided to know the charging status. The red light denotes charging and the green light indicates the hoverboard battery is not in charge or fully charge.

The connector diameter of the LotFancy charger is 8mm so check your previous charger whether it meets the requirement. The charging cable length is 6 feet which is quite longer than the length of the normal charger.

Specifications

  • Input Voltage: 120V
  • Output Voltage: 36V
  • Connector Diameter: 8 mm
  • Charger length:6 Feet
  • Charge Time: 4 to 6 Hours
  • Light Indicator: Yes

Additional Featured

  • UL Certified Hoverboard Charger
  • Long Charger Cable

2. Mouow Hoverboard Charger

Important Specifications

  • Three Prong Connector
  • Suitable For 36V To 42V Hoverboard Battery.
  • 8.9 mm Connector Diameter

The Mouow Hoverboard Charger is one of the Chargers which are UL Certified. The most amazing quality of this Charger is that it charges the hoverboard faster when comparing with other chargers.

The Connector diameter is 8.9 mm, as you can see there is a connector diameter difference between the Lotfancy charger(8mm) which we have seen before, and mouow charger(8.8 mm), which shows there are a lot of variants in the hoverboard charger and must be chosen carefully.

The length of the charger wire is 39.4 inches, it also comes with a Light indicator that denotes the charging status. The current rating is 1.5 Amps. This charger suits hoverboard battery with the requirement of 32 volts to 42 volts.

This is a perfect hoverboard charger if you are looking for faster hoverboard charging.

Specification

  • Input Voltage: 240V
  • Output Voltage: 36V
  • Connector Diameter: 8.9 mm
  • Current Rating: 1.5 Amps
  • Charger length: 39.4 In / 100 CM
  • Light Indicator: Yes

Additional Features

  • Short circuit, Overvoltage, Overload Protection
  • Fast Charging
  • Ul Certified

 

3. Eseegoo Hoverboard Charger

Important Specifications

  • Three Prong Connector
  • Suitable For 24V Hoverboard Batteries
  • 8mm Connector Diameter

The hoverboard chargers mentioned before are for 36 Volt hoverboard battery but there are also hoverboards that function with 24 Volt battery, Eseegoo is one of the few hoverboard chargers that is made for 24 Volt hoverboard battery.

The Eseegoo took place in this top hoverboard charger list because it is UL certified that assures the safety and built-in quality of the charger.

The most notable feature of this charger is that it turns off itself when the battery is fully charged, not to mention that many hoverboard fire accidents happen due to overcharging the battery and if this charger is used then you can avoid overcharging problems.

Specification

  • Input Voltage: 24 V
  • Output Voltage: 29 V
  • Connector Diameter: 8 mm
  • Current Rating: 2 Amps
  • Light Indicator: No

Additional Features

  • Automatic Turn Off Feature
  • UL Certified

One Prong Replacement Hoverboard Chargers

One prong hoverboard charger is a very rare charger. The Production of these chargers is limited since most hoverboard manufacturers prefer three-prong chargers. But still, there are hoverboards like Gotrax Glide and Jetson Rogue hoverboards that use one prong charger.

What you are going to see further are the top two hoverboard chargers in the market that falls under one prong category.

1. Eseegoo One Prong Hoverboard Charger

Important Specifications

  • One Prong Connector
  • Suitable For 24V Lithium Battery
  • Connector Measurements – 5.5*2.1mm or  5.5*2.5mm

Eseegoo hoverboard charger is a UL Certified charger which means it is well built, ensures safety and quality. This charger is suitable for a hoverboard battery with a requirement of 24V.

The Connector measurement is 5.5 * 2.5 mm, and the Current rating is 2 amps, so if your requirement meets with this charger specification then this is a highly recommended charger for your hoverboard due to the fact that it is UL Certified.

Specification

  • Input Voltage: 240V
  • Output Voltage: 29V
  • Connector Measurement: 5.5*2.1mm or 5.5*2.1 mm
  • Current Rating: 2 Amps

Additional Features

  • UL Certified
  • Light Indicator

2. Abakoo One Prong Hoverboard Charger

Important Specifications

  • One Prong Connector
  • Suitable For 24V Lithium Battery
  • Connector Measurements – 5.5*2.1mm plug with a 5.5*2.5mm Tip

The Abakoo Hoverboard charger is suitable for Hoverboards that have a 24 V battery. It comes with 5.5*2.1mm plug with a 5.5*2.5mm Tip, in other words, it is suitable for both 5.5*2.1mm and 5.5*2.5mm connector diameter requirement.

Abokoo hoverboard also comes with a light indicator which denotes the charging status, red for charging, and green for fully charged. Abakoo is not UL Certified like Esigoo but they are much durable than other chargers in the market and also it is made of environmental friendly material.

Specification

  • Output Voltage: 29 V
  • Input Voltage: 24 V
  • Connector Measurement: 5.5*2.1mm or 5.5*2.1 mm
  • Current Rating: 2 Amps

Additional Features

  • Durable and fireproof material
  • Light Indicator

Frequently Asked Questions

1. How much does a hoverboard charger cost

Normally the hoverboard charger cost ranges between 15 $ to 27 $. Branded hoverboard manufacturer’s chargers will cost around 25$.

It is always recommended not to compromise in quality over the price because choosing the wrong charger based on price might affect the durability of your hoverboard as well as the charger itself. 

2. Do all Hoverboards use the same charger?

No, there are many types of Hoverboard chargers that vary in volt, amps, Number of Connector pins, Connector diameter.

Some chargers might be compatible with other brands or other models but that does not mean hoverboard chargers are universal.

3. How long does it take for a hoverboard to charge?

Normally, a hoverboard takes from 2 to 3 hrs for a complete charge. And not to mention the charging time might vary based on the hoverboard and the charger you use.

4. Can you charge a hoverboard without the charger?

Yes! For some hoverboards. If your hoverboard is with a single connector pin/prong then you might be able to charge it with a laptop charger.

But make sure the hoverboard requirement meets your laptop charger specifications else it might damage your hoverboard as well as your charger.

5. Can I charge my hoverboard overnight?

No, it is not advisable to charge your hoverboard overnight because it leads to overcharging and that might in turn damage the lithium battery of your hoverboard as well as your charger.

If you definitely want to charge your hoverboard overnight then you can use a timer switch like TEKLECTRIC Timer Switch in which you can set the charging time and when the timer expires then it will automatically turn off, by doing this you can avoid overcharging and also you can save power.

THE BOTTOM LINE

The best suggestion in choosing a replacement hoverboard charger is to look for the manufacturer’s own replacement charger because those chargers are particularly developed to suit the requirement of a hoverboard battery.

In case if you don’t find the right charger then follow the preceding procedures in this article which will help you to find the suitable charger. The mentioned chargers in this article are hand-picked based on their top built-in quality so you can also choose any one of them based on your hoverboard requirements.